Cara konfigurasi "ROUTER"

         --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: no


Press RETURN to get started!



Router>enable
Router#configure terminal
Router(config)#hostname R1
(ini berfungsi untuk memberi nama jika kita mempunyai beberapa router dalam jaringan hal ini berfungsi untuk memudahkan kita dalam mengenali router tersebut)
R1(config)#interface fastEthernet 0/0
R1(config)#interface fastEthernet 0/0
R1(config-if)#ip address 192.168.1.1 255.255.255.0
R1(config-if)#no shutdown
("no shutdown" itu untuk menyimpan pengaturan yang telah kita lakukan)
%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
%LINEPROTO-5-UPDOWN: Line protocol on Interface FastEthernet0/0, changed state to up
R1(config-if)#exit
R1(config)#interface s0/0/0
R1(config-if)#ip add 192.168.2.1 255.255.255.0
R1(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to down
R1(config-if)#clock rat 9600
R1(config-if)#exit
R1(config)#ip route 0.0.0.0 0.0.0.0 192.168.2.2
R1(config)#








konfigurete pada router kedua
   --- System Configuration Dialog ---

Continue with configuration dialog? [yes/no]: no


Press RETURN to get started!



Router>enable
Router#configure terminal
Enter configuration commands, one per line.  End with CNTL/Z.
r2(config)#hostname R2
R2(config)#interface fa0/0
R2(config-if)#ip address 192.168.3.1 255.255.255.0
R2(config-if)#no shutdown

%LINK-5-CHANGED: Interface FastEthernet0/0, changed state to up
R2(config-if)#exit
R2(config)#int s0/0/0
R2(config-if)#ip add 192.168.2.2 255.255.255.0
R2(config-if)#no shutdown

%LINK-5-CHANGED: Interface Serial0/0/0, changed state to up
R2(config-if)#
%LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0/0/0, changed state to upo up
R2(config-if)#exit
R2(config)#ip route 0.0.0.0 0.0.0.0 192.168.2.1
R2(config)#